论文标题
不连续的剪切增厚(DST)用吸附的刷子聚合物覆盖的球形铁颗粒过渡
Discontinuous Shear Thickening (DST) transition with spherical iron particles coated by adsorbed brush polymer
论文作者
论文摘要
在这项工作中,我们探讨了非常浓缩的(0.55 <$φ$ <0.67)的羰基铁(CI)颗粒的悬浮液。在大量的体积分数中观察到了强大的DST,这些量表与其他系统相对呈现一些特异性。特别是,在给定的体积分数范围内,DST过渡突然出现而不会在剪切增厚之前。通过同时测量悬浮液和流变曲线的电阻,证实了颗粒摩擦网络的存在。使用Wyart-Cates模型,我们表明,增加体积分数,摩擦触点的比例越来越快地随着与计算机模拟的预测不同意的压力。在存在磁场的情况下,观察到相同的行为,此外,在过渡之前,粘度与磁场的粘度非常强。我们通过在剪切应力的作用下通过聚合物层的互穿来解释这种行为,以及通过将聚合物从表面排出的磁应力的影响。此外,我们指出,在DST跃迁上方,我们没有观察到体积分数范围的干扰,而W-C模型则预测了这一点。基于以下事实:在没有剪切流的情况下,聚合物应恢复表面并破坏摩擦接触,我们可以预测渐近的非零剪切速率并重现实验行为。
In this work we explore the rheology of very concentrated (0.55<$Φ$<0.67) suspensions of carbonyl iron (CI) particles coated by a small polymer. A strong DST is observed in a large range of volume fraction presenting some specificities relatively to other systems. In particular, in a given range of volume fraction, the DST transition appears suddenly without being preceded by shear thickening. The presence of a frictional network of particles is confirmed by a simultaneous measurement of the electric resistance of the suspension and of the rheological curve. Using the Wyart-Cates model we show that, increasing the volume fraction, the fraction of frictional contacts grows more and more quickly with the stress that disagrees with the prediction of computer simulations. The same kind of behavior is observed in the presence of a magnetic field with, in addition, a very strong increase of the viscosity with the magnetic field before the transition. We interpret this behavior by the interpenetration of the polymer layer under the effect of the shear stress-and of the magnetic stress-followed by the expulsion of the polymer out of the surfaces. Besides we point that, above the DST transition, we do not observe a jamming in the range of volume fraction whereas it is predicted by the W-C model. Based on the fact that in the absence of shear flow, the polymer should come back to the surface and destroy the frictional contacts we can predict an asymptotic non-zero shear rate and reproduce the experimental behavior.