-
GB-T 21816-2008 化学品 固有生物降解性 赞恩-惠伦斯试验.pdf
-
GB-T 21818-2008 化学品 固有生物降解性 改进的MITI试验 II.pdf
-
GB-T 21827-2008 化学品 皮肤变态反应试验 局部淋巴结方法.pdf
-
GB-T 21829-2008 化学品 污水好氧处理模拟试验 活性污泥单元法.pdf
-
GB-T 21831-2008 化学品 快速生物降解性 密闭瓶法试验.pdf
-
GB-T 21838.2-2008 金属材料 硬度和材料参数的仪器化压痕试验 第2部分 试验机的检验和校准.pdf
-
GB-T 21843-2008 塑料 氯乙烯均聚和共聚树脂 用机械筛测定粒径.pdf
-
GB-T 21845-2008 化学品 水溶解度试验.pdf
-
GB-T 21847-2008 工业用化工产品 气体可燃性的确定.pdf
-
GB-T 21849-2008 工业用化学品 固体和液体水解产生的气体可燃性的确定.pdf
-
GB-T 21851-2008 化学品 批平衡法检测 吸附-解吸附试验.pdf
-
GB-T 21853-2008 化学品 分配系数 正辛醇-水 摇瓶法试验.pdf
-
GB-T 21855-2008 化学品 与pH有关的水解作用试验.pdf
-
GB-T 21857-2008 化学品 快速生物降解性 改进的OECD筛选试验.pdf
-
GB-T 21859-2008 气体和蒸气点燃温度的测定方法.pdf
-
GB-T 21862.2-2008 色漆和清漆 密度的测定 第2部分:落球法.pdf
-
GB-T 21862.4-2008 色漆和清漆 密度的测定 第4部分:压杯法.pdf
-
GB-T 21863-2008 凝胶渗透色谱法(GPC) 用四氢呋喃做淋洗液.pdf
-
GB-T 21865-2008 用半自动和自动图象分析法测量平均粒度的标准测试方法.pdf
-
GB-T 21867.2-2008 颜料和体质颜料 分散性的评定方法 第2部分 由研磨细度的变化进行评定.pdf
-
GB-T 21868.1-2008 颜料和体质颜料 评定分散性用的分散方法 第1部分 总则.pdf
-
GB-T 21868.3-2008 颜料和体质颜料 评定分散性用的分散方法 第3部分 用高速搅拌机分散.pdf
-
GB-T 21868.5-2008 颜料和体质颜料 评定分散性用的分散方法 第5部分 用自动平磨机分散.pdf
-
GB-T 21869-2008 医用手套表面残余粉末的测定.pdf
-
GB-T 219-2008 煤灰熔融性的测定方法.pdf
-
GB-T 21931.1-2008 镍、镍铁和镍合金 碳含量的测定 高频燃烧红外吸收法.pdf
-
GB-T 21931.3-2008 镍、镍铁和镍合金 磷含量的测定 磷钒钼黄分光光度法.pdf
-
GB-T 21933.2-2008 镍铁 硅含量的测定 重量法.pdf
-
GB-T 21937-2008 土方机械 履带式和轮胎式推土机的推土铲 容量标定.pdf
-
GB-T 21942-2008 土方机械 装载机和正铲挖掘机的铲斗 容量标定.pdf
-
GB-T 21960-2008 农林拖拉机驾驶座试验方法和验收条件.pdf
-
GB-T 21989-2008 塑料 聚氯乙烯糊 用Severs流变仪测定表观黏度.pdf
-
GB-T 21992-2008 糊用聚氯乙烯树脂 杂质与外来粒子数的测定.pdf
-
GB-T 22035-2008 乳及乳制品中植物油的检验 气相色谱法.pdf
-
GB-T 22042-2008 服装 防静电性能 表面电阻率试验方法.pdf
-
GB-T 22047-2008 土壤中塑料材料最终需氧生物分解能力的测定 采用测定密闭呼吸计中需氧量或测定释放的二氧化碳的方法.pdf
-
GB-T 22054-2008 有机液体 除石油产品 蒸馏特性测定通用方法.pdf
-
GB-T 22077-2008 架空导线蠕变试验方法.pdf
-
GB-T 22107-2008 气动方向控制阀 切换时间的测量.pdf
-
GB-T 22131-2008 筒形锻件内表面超声波检测方法.pdf
-
GB-T 22136-2008 工业过程控制系统 评估用自适应控制器分类.pdf
-
GB-T 22138-2008 幻灯机画面区温升玻璃夹层幻灯试验片测试方法.pdf
-
GB-T 22150-2008 电视广播声音和图像的相对定时.pdf
-
GB-T 22159.3-2008 声学与振动 弹性元件振动 声传递特性实验室测量方法 第3部分:弹性支撑件平动动刚度的间接测量方法.pdf
-
GB-T 22181.21-2008 等离子体显示器件 第2-1部分:光学参数测量方法.pdf
-
GB-T 22182-2008 油菜籽叶绿素含量测定 分光光度计法.pdf
-
GB-T 22218-2008 船舶与海上技术 配有弹性密封件的金属管路附件耐火性能 试验方法.pdf
-
GB-T 22224-2008 食品中膳食纤维的测定 酶重量法和酶重量法-液相色谱法.pdf
-
GB-T 22227-2008 工业用化学品 具有低溶解性的固体和液体水溶性测定 圆柱层析法.pdf
-
GB-T 22229-2008 工业用化学品 固体及液体的蒸气压在10-3Pa至1Pa范围内的测定 蒸气压平衡法.pdf
-
GB-T 22231-2008 颗粒物粒度分布-纤维长度和直径分布.pdf
-
GB-T 22235-2008 液体粘度的测定.pdf
-
GB-T 22237-2008 表面活性剂 表面张力的测定.pdf
-
GB-T 22273-2008 良好实验室规范建议性文件 良好实验室规范原则在体外研究中的应用.pdf
-
GB-T 22295-2008 透明液体颜色测定方法(加德纳色度).pdf
-
GB-T 223.11-2008 钢铁及合金 铬含量的测定 可视滴定或电位滴定法.pdf
-
GB-T 223.19-1989 钢铁及合金化学分析方法 新亚铜灵-三氯甲烷萃取光度法测定铜量.pdf
-
GB-T 223.3-1988 钢铁及合金化学分析方法 二安替比林甲烷磷钼酸重量法测定磷量.pdf
-
GB-T 223.31-2008 钢铁及合金 砷含量的测定 蒸馏分离-钼蓝分光光度法.pdf
-
GB-T 223.6-1994 钢铁及合金化学分析方法 中和滴定法测定硼量.pdf
-
GB-T 223.64-2008 钢铁及合金 锰含量的测定 火焰原子吸收光谱法.pdf
-
GB-T 223.78-2000 钢铁及合金化学分析方法 姜黄素直接光度法测定硼含量.pdf
-
GB-T 223.84-2009 钢铁及合金 钛含量的测定 二安替比林甲烷分光光度法.pdf
-
GB-T 223.86-2009 钢铁及合金 总碳含量的测定 感应炉燃烧后红外吸收法.pdf
-
GB-T 22308-2008 密封垫板材料密度试验方法.pdf
-
GB-T 22310-2008 道路车辆 制动衬片 盘式制动衬块受热膨胀量试验方法.pdf
-
GB-T 22313-2008 塑料 用于聚氨酯生产的多元醇 水含量的测定.pdf
-
GB-T 22319.8-2008 石英晶体元件参数的测量 第8部分:表面贴装石英晶体元件用测量夹具.pdf
-
GB-T 22342-2008 石油天然气工业 井下安全阀系统 设计、安装、操作和维护.pdf
-
GB-T 22365-2008 纸和纸板印刷表面强度的测定.pdf
-
GB-T 22376.1-2008 胶粘剂 本体试样的制备方法 第1部分:双组份体系.pdf
-
GB-T 22410-2008 包装 危险货物运输包装 塑料相容性试验.pdf
-
GB-T 22427.13-2008 淀粉及其衍生物二氧化硫含量的测定.pdf
-
GB-T 22428.1-2008 淀粉水解产品 还原力和葡萄糖当量测定.pdf
-
GB-T 22428.3-2008 葡萄糖干燥失重测定.pdf
-
GB-T 22460-2008 动植物油脂 罗维朋色泽的测定.pdf
-
GB-T 22476-2008 中空玻璃稳态U值(传热系数)的计算及测定.pdf
-
GB-T 22481-2008 谷物、油料和豆类 单向气流穿过散粮的单位压力损失测定.pdf
-
GB-T 22500-2008 动植物油脂 紫外吸光度的测定.pdf
-
GB-T 22512.2-2008 石油天然气工业 旋转钻井设备 第2部分:旋转台肩式螺纹连接的加工与测量.pdf
-
GB-T 22561-2008 真空热处理.pdf
-
GB-T 22567-2008 电气绝缘材料 测定玻璃化转变温度的试验方法.pdf
-
GB-T 22579-2008 拟定用于电工设备中聚合性复合物最大允许温度清单的导则.pdf
-
GM T 0127-2023 移动终端密码模块应用接口规范.pdf
-
GM T 0129-2023 SSH密码协议规范.pdf
-
GM T 0131-2023 电子签章应用接口规范.pdf
-
ISO 10110-16 2023 Optics and photonics — Preparation of drawings for optical elements and sy.pdf
-
ISO 10300-2 2023 Calculation of load capacity of bevel gears — Part 2 Calculation of surf).pdf
-
ISO 10425 2023 Steel wire ropes for the petroleum and natural gas industries — M.pdf
-
ISO 10524-1 2018 Amd 1 2023 Pressure regulators for use with medical gases — Part 1 Pr.pdf
-
ISO 10563 2023 Building and civil engineering sealants — Determination of chang.pdf
-
ISO 10813-1 2023 Vibration generating machines — Guidance for selection — Part 1 E.pdf
-
ISO 10975 2023 Agricultural machinery and tractors — Auto-guidance systems for op.pdf
-
ISO 10991 2023 Microfluidics — Vocabulary.pdf
-
ISO 11114-1 2020 Amd 1 2023 Gas cylinders — Compatibility of cylinder and valve materia.pdf
-
ISO 11158 2023 Lubricants, industrial oils and related products (class L) — Family H (.pdf
-
ISO 11239 2023 Health informatics — Identification of medicinal products — Data.pdf
-
ISO 11267 2023 Soil quality — Inhibition of reproduction of Collembola (Folsomia candi.pdf
-
ISO 11363-1 2018 Amd 1 2023 Gas cylinders — 17E and 25E taper threads for connection of va.pdf
-
ISO 11607-1 2019 Amd 1 2023 Packaging for terminally sterilized medical devices —.pdf
-
ISO 11623 2023 Gas cylinders — Composite cylinders and tubes — Periodic inspection and.pdf
-
ISO 11737-3 2023 Sterilization of health care products — Microbiological methods — Part 3 B.pdf
-
ISO 11798 2023 Information and documentation — Permanence and durability of writ.pdf
-
ISO 11855-3 2021 Amd 1 2023 Building environment design — Embedded radiant he.pdf
-
ISO 11855-5 2021 Amd 1 2023 Building environment design — Embedded radiant heating a.pdf
-
ISO 11936 2023 Leather — Determination of total content of certain bisphenols.pdf
-
ISO 12156-1 2023 Diesel fuel — Assessment of lubricity using the high-frequency rec.pdf
-
ISO 12164-22023 Hollow taper interface with flange contact surface — Part 2 Receivers of ty.pdf
-
ISO 12164-4 2023 Hollow taper interface with flange contact surface — Part 4 Receive.pdf
-
ISO 12164-6 2023 Hollow taper interface with flange contact surface — Part 6 Receive.pdf
-
ISO 12261 2023 Aerospace — Screws, pan head, internal offset cruciform ribb.pdf
-
ISO 12614-20 2023 Road vehicles — Liquefied natural gas (LNG) fuel system components — Pa.pdf
-
ISO 12736-2 2023 Oil and gas industries including lower carbon energy — Wet thermal insulat.pdf
-
ISO 12759-1 2023 Fans — Efficiency classification for fans — Part 1 General requirements.pdf
-
ISO 13105-1 2023 Building construction machinery and equipment — Machinery for concrete.pdf
-
ISO 13145 2023 Rubber — Determination of viscosity and stress relaxation using a rotorles.pdf
-
ISO 13167 2023 Water quality — Plutonium, americium, curium and neptunium — T.pdf
-
ISO 13400-2 2019 Amd 1 2023 Road vehicles — Diagnostic communication over Internet Prot.pdf
-
ISO 13703-3 2023 Oil and gas industries including lower carbon energy — Piping syst.pdf
-
ISO 13927 2023 Plastics — Simple heat release test using a conical radiant heater and a th.pdf
-
ISO 13997 2023 Protective clothing — Mechanical properties — Determination of resistance.pdf
-
ISO 14126 2023 Fibre-reinforced plastic composites — Determination of compressive.pdf
-
ISO 14300-2 2023 Space systems — Programme management — Part 2 Product assurance.pdf
-
ISO 14595 2023 Microbeam analysis — Electron probe microanalysis — Guidelines for th.pdf
-
ISO 14624-2 2023 Space systems — Safety and compatibility of materials — Part 2 De.pdf
-
ISO 14635-1 2023 Gears — FZG test procedures — Part 1 FZG test method A.pdf
-
ISO 14635-3 2023 Gears — FZG test procedures — Part 3 FZG test method A 2,8 50 for.pdf
-
ISO 14897 2023 Plastics — Polyols for use in the production of polyurethanes — D.pdf
-
ISO 14920 2023 Thermal spraying — Spraying and fusing of self-fluxing alloys.pdf
-
ISO 1496-4 2023 Series 1 freight containers — Specification and testing — Part 4 Non-pres.pdf
-
ISO 15380 2023 Lubricants, industrial oils and related products (class L) — Family H (.pdf
-
ISO 15500-23 2023 Road vehicles — Compressed natural gas (CNG) fuel system components.pdf
-
ISO 15551 2023 Petroleum and natural gas industries — Drilling and production equipment.pdf
-
ISO 16000-42 2023 Indoor air — Part 42 Measurement of the particle number concentration by.pdf
-
ISO 16143-4 2023 Stainless steels for general purposes — Part 4 Bright products.pdf
-
ISO 1663 2023 Rigid cellular plastics — Determination of water vapour transmission prope.pdf
-
ISO 16750-1 2023 Road vehicles — Environmental conditions and testing for electrical.pdf
-
ISO 16750-5 2023 Road vehicles — Environmental conditions and testing for electrical and ele.pdf
-
ISO 17294-2 2023 Water quality — Application of inductively coupled plasma mass spectrome.pdf
-
ISO 17573-3 2023 Electronic fee collection — System architecture for vehicle-related tolling —.pdf
-
ISO 17710 2023 Plastics — Polyols for use in the production of polyurethanes — Determin.pdf
-
ISO 17751-2 2023 Textiles — Quantitative analysis of cashmere, wool, other specialty ani.pdf
-
ISO 17842-1 2023 Safety of amusement rides and amusement devices — Part 1.pdf
-
ISO 18134-3 2023 Solid biofuels — Determination of moisture content — Part 3 Moistu.pdf
-
ISO 18242 2016 Amd 1 2023 Cardiovascular implants and extracorporeal systems — Centrif.pdf
-
ISO 18400-3012023 Soil quality — Sampling — Part 301 Sampling and on site semi-qu.pdf
-
ISO 18589-3 2023 Measurement of radioactivity in the environment — Soil — Part.pdf
-
ISO 18692-4 2023 Fibre ropes for offshore stationkeeping — Part 4 Polyarylate.pdf
-
ISO 18937-1 2023 Imaging materials — Methods for measuring indoor light stability o.pdf
-
ISO 19111 2019 Amd 2 2023 Geographic information — Referencing by coordina.pdf
-
ISO 19123-1 2023 Geographic information — Schema for coverage geometry and fu.pdf
-
ISO 19150-6 2023 Geographic information — Ontology — Part 6 Service ontology register.pdf
-
ISO 19238 2023 Radiological protection — Performance criteria for service laboratories.pdf
-
ISO 19642-1 2023 Road vehicles — Automotive cables — Part 1 Vocabulary and design guidel.pdf
-
ISO 19682 2023 Furniture — Tables — Test methods for the determination of stability,.pdf
-
ISO 199 2023 Rolling bearings — Thrust bearings — Geometrical product specifica.pdf
-
ISO 20200 2023 Plastics — Determination of the degree of disintegration of plastic m.pdf
-
ISO 20431 2023 Heat treatment — Control of quality.pdf
-
ISO 20653 2023 Road vehicles — Degrees of protection (IP code) — Protection of elect.pdf
-
ISO 20749 2023 Dentistry — Pre-capsulated dental amalgam.pdf
-
ISO 20785-3 2023 Dosimetry for exposures to cosmic radiation in civilian aircraft.pdf
-
ISO 20956 2023 Radiological protection — Low dose rate calibration of instrument.pdf
-
ISO 21219-19 2023 Intelligent transport systems — Traffic and travel information (TTI) via tr.pdf
-
ISO 21384-3 2023 Unmanned aircraft systems — Part 3 Operational procedures.pdf
-
ISO 21536 2023 Non-active surgical implants — Joint replacement implants — Speci.pdf
-
ISO 21622-2 2023 Irrigation techniques — Remote monitoring and control for.pdf
-
ISO 22028-4 2023 Photography and graphic technology — Extended colour encoding.pdf
-
ISO 22077-3 2023 Health informatics — Medical waveform format — Part 3 Long-term electro.pdf
-
ISO 22163 2023 Railway applications — Railway quality management system — ISO 9001 20.pdf
-
ISO 22241-4 2023 Diesel engines — NOx reduction agent AUS 32 — Part 4 Refilling interface.pdf
-
ISO 22343-2 2023 Security and resilience — Vehicle security barriers — Part 2 Application.pdf
-
ISO 22477-2 023 Geotechnical investigation and testing — Testing of geotechnical s.pdf
-
ISO 22574 2023 Road vehicles — Brake linings friction materials — Visual inspection.pdf
-
ISO 22640 2023 Rubber — Framework for physical and chemical characterization of.pdf
-
ISO 22733-2 2023 Road vehicles — Test method to evaluate the performance of autonomous.pdf
-
ISO 22804 2023 Marine technology — General technical requirement of marine co.pdf
-
ISO 22926 2023 Implants for surgery — Specification and verification of synthetic anatomica.pdf
-
ISO 22932-5 2023 Mining — Vocabulary — Part 5 Drilling and blasting.pdf
-
ISO 22975-4 2023 Solar energy — Collector components and materials — Part 4 Glazin.pdf
-
ISO 23139 2023 Biological equipment for treating air and other gases — Requirement.pdf
-
ISO 23316-2 2023 中文版 农业和林业用拖拉机和机械 电⽓大功率接⼝.pdf
-
ISO 23316-5 2023 Tractors and machinery for agriculture and forestry — Electrical hig.pdf
-
ISO 23447 2023 Healthcare organization management — Hand hygiene performance.pdf
-
ISO 23537-2 2023 Requirements for sleeping bags — Part 2 Fabric and material properties.pdf
-
ISO 23551-5 2023 Safety and control devices for gas burners and gas-burning appliances — Pa.pdf
-
ISO 23597 2023 Rare earth — Determination of rare earth content in individual rare eart.pdf
-
ISO 23702-1 2023 Leather — Per- and polyfluoroalkyl substances — Part 1 Determinati.pdf
-
ISO 23948 2023 Plastics — Intumescence properties of PVC materials and prod.pdf
-
ISO 24065 2023 Aerospace — High-power solid-state power controller — Genera.pdf
-
ISO 24087 2023 Rubber, vulcanized — Determination of the glass transition temperat.pdf
-
ISO 24187 2023 Principles for the analysis of microplastics present in the environment.pdf
-
ISO 24227 2023 Validation protocol for walking speed as extracted from various sens.pdf
-
ISO 24354 2023 General requirements for the payload interface of civil unmanned ai.pdf
-
ISO 24382 2023 Bee pollen — Specifications.pdf
-
ISO 24395 2023 Dentistry — Classification of tooth restorations preparation.pdf
-
ISO 24421 2023 Biotechnology — Minimum requirements for optical signal measureme.pdf
-
ISO 24460 2023 Measurement of fluid flow rate in closed conduits — Radioactive tracer me.pdf
-
ISO 24483 2023 Epoxidized natural rubber — Specifications.pdf
-
ISO 24569 2023 Ships and marine technology — External firefighting system test methods.pdf
-
ISO 24585-2 2023 Graphic technology — Multispectral imaging measurement and colori.pdf
站内资源均来自网友分享或网络收集整理,若无意中侵犯到您的权利,敬请联系我们
微信(点击查看客服),我们将及时删除相关资源。